Saturday 31 August 2013

MC9232 Microprocessors and its Applications Notes Lecture Notes Subject Notes MC9232 Notes MCA 3rd Semester Anna University



MC9232 Microprocessors and its Applications Notes Lecture Notes Subject Notes MC9232 Notes MCA 3rd Semester Anna University

MC9232 Microprocessors and its Applications Notes Anna University MC9232 Notes MCA 3rd Semester Notes


Anna University MCA Notes - MC9232 Notes

Anna University MC9232 Microprocessors and its Applications Notes is provided below. MC9232 Notes all 5 units notes are uploaded here. here MC9232 notes download link is provided and students can download the MC9232 Lecture Notes and can make use of it.

MC9232 Microprocessors and its Applications notes MCA Notes 3rd sem


Click below link to download Microprocessors and its Applications Notes.


MC9232 Microprocessors and its Applications Notes Lecture Notes Subject Notes MC9232 Notes MCA 3rd Sem
MC9232 Microprocessors and its Applications Notes MC9232 Notes - Click Here

 If you have any problem in downloading the above material , you can comment below.

search by students 

MC9232 Microprocessors and its Applications Anna university MCA notes
Anna university MCA Notes
MCA 3rd Semester Notes Anna University
MC9232 Microprocessors and its Applications notes
Anna University Microprocessors and its Applications 3rd sem MCA notes
MC9232 Microprocessors and its Applications Notes
Anna University MC9232 Notes
MC9232 Microprocessors and its Applications Lecture Notes Subject Notes Anna University

MC9215 Accounting and Financial Management Notes Lecture Notes Subject Notes MC9215 Notes MCA 1st Semester Anna University



MC9215 Accounting and Financial Management Notes Lecture Notes Subject Notes MC9215 Notes MCA 1st Semester Anna University

MC9215 Accounting and Financial Management Notes Anna University MC9215  Notes MCA 1st Semester Notes


Anna University MCA Notes - MC9215 Notes

Anna University MC9215 Accounting and Financial Management Notes is provided below. MC9215 Notes all 5 units notes are uploaded here. here MC9215 notes download link is provided and students can download the MC9215 Lecture Notes and can make use of it.

MC9215 Accounting and Financial Management Notes AFM notes MCA Notes 1st sem


Click below link to download Accounting and Financial Management Notes.


MC9215 Accounting and Financial Management Notes Lecture Notes Subject Notes MC9215 Notes MCA 1st Sem
MC9215 Accounting and Financial Management Notes MC9215 Notes - Click Here

 If you have any problem in downloading the above material , you can comment below.

search by students 

MC9215 Accounting and Financial Management Anna university MCA notes
Anna university MCA Notes
MCA 1st Semester Notes Anna University
MC9215 Accounting and Financial Management notes
Anna University Accounting and Financial Management 1st sem MCA notes
MC9215 Accounting and Financial Management Notes
Anna University MC9215 Notes
MC9215 Accounting and Financial Management Lecture Notes Subject Notes Anna University

DBRAU Result 2013 Agra Ambedkar university BA Bsc Bcom B.Ed BBA MA Msc Part 1 2 3 www.dbrau.ac.in



DBRAU Result 2013 Agra Ambedkar university BA Bsc Bcom B.Ed BBA MA Msc Part 1 2 3 www.dbrau.ac.in

DBRAU Result 2013 Agra Ambedkar university BA Bsc Bcom B.Ed BBA MA Msc Part 1 2 3 www.dbrau.ac.in DBRAU Result 2013: Dr BR Ambedkar University Agra has conducted the main exam and private exam for the candidates who are studying under the DBRAU Agra university in the month of March 2013. Now after a long time after the Continue Reading »

The post DBRAU Result 2013 Agra Ambedkar university BA Bsc Bcom B.Ed BBA MA Msc Part 1 2 3 www.dbrau.ac.in appeared first on University.

Anna University November/December 2013 & Jan 2014 Exam Notification



Anna University November/December 2013 & Jan 2014 Exam Notification

not foound
Anna University 










ANNA UNIVERSITY CHENNAI – 600 025
NOTIFICATION

OCT./NOV./DEC. 2013 & JAN. 2014 EXAMINATIONS


       It is informed that the Oct./Nov./Dec. 2013 (Higher Semester) and Dec. 2013/ January 2014 (I Semester) Theory, Practical & Project viva voce examinations are scheduled to be held as detailed below:-


Higher Semesters (II to X) of UG and PG Programmes

Last working day              
                 08.11.2013

Practical Examinations     
                Slot I : 24.10.2013 to 31.10.2013
                Slot II : 05.11.2013 to 11.11.2013
Commencement of UG/PG Theory Examinations             
                  13.11.2013


I Semester of UG and PG Programmes

Last working day                
                              20.12.2013 for UG
                              26.12.2013 for PG

Practical Examinations                             
                           Slot I : 09.12.2013 to 14.12.2013
                           Slot II : 16.12.2013 to 20.12.2013
 Commencement of Theory Examinations      
                            02.01.2014


III Semester of M.E./M.Tech. Project Viva voce (Phase -1) Examinations
Last date for submission of Project Report                                  : 08.12.2013
to the college by the students
M.E./M.Tech. Project Viva-Voce (Phase - I)                                : 

27.12.2013 to 31.12.2013



DOWNLOAD THE COPY

tags:  anna university time table 2013,
 anna university time table , 
anna university Nov/dec  2013 exam time table for ECE,
anna university Nov/dec  2013 exam time table for EEE,
anna university Nov/dec  2013 exam time table for IT,
anna university Nov/dec  2013 exam time table for CSE,
anna university Nov/dec  2013 exam time table for CIVIl,
anna university Nov/dec  2013 exam time table for MECH,
anna university  2013 Nov/dec time table for 3rd semester,
anna university  2013 Nov/dec time table for 5th semester,
anna university  2013 Nov/dec time table for 7th semester,
anna university time table for regulation 2008 ,
anna university time table for 1st sem  regulation 2013 ,
anna university time table 2013 regulation 2008,
anna university time table for pg 2013 ,
anna university time table November/December 2013,

Power System Analysis 6th AM11 EE2351



Power System Analysis 6th AM11 EE2351

B.E. / B.Tech. Degree Examination, April / May 2011
Sixth Semester
Electrical and Electronics Engineering
EE 2351 – Power System Analysis
(Regulation 2008)

Other Departments Papers: Click Here

Download PDF File - Click Here

Part A – (10 × 2 = 20 marks)

1. Draw a simple per-phase model for a cylindrical rotor synchronous machine?
2. What are the advantages of per unit system?
3. What is Jacobian matrix?
4. What is a slack bus?
5. Mention the objectives of short circuit analysis.
6. Write down the balanced and unbalanced faults occurring in a power system.
7. What is sequence network?
8. Write the symmetrical components of a three phase system?
9. Define critical clearing angle.
10. Write swing equation.

Part B – (5 × 16 = 80 marks)

11. (a) (i) With the help of single line diagram, explain the basic components of a power system. (8)
(ii) Write detailed notes about the per-phase model of a three phase transformer. (8)
(OR)
(b) Draw the impedance diagram for the electric power system shown in given figure showing all impedance in per unit on a 100 MVA base.
Choose 20 KV as the voltage base for generator. The tree-phase power and line-lie ratings are given below. (16)
Generator G1: 90 MVA 20 KV X = 9 %
Transformer T1: 80 MVA 20 / 200 KV X = 16 %
Transformer T2: 80 MVA 200 / 20 KV X = 20 %
Generator G2: 90 MVA 18 KV X = 9 %
Line: 200 KV X = 120
Load: 200 KV, S = 48 MW + j64 MVAr

12 (a) With neat flow chart explain the computational procedure for load flow solution using fast decoupled method when the system contains all types of buses.
(OR)
(b) Explain the step by step computational procedure for Gauss-Seidel method of load flow studies.

13 (a) Explain symmetrical fault analysis using Zbus matrix with eat flow chart.
(OR)
(b) A 11 KV, 100 MVA alternator having a sub-transient reactance of 0.25 p.u is supplying a 50 MVA motor having a sub-transient reactance of 0.2 p.u through a transmission line. The line reactance is 0.05 p.u on a base of 100 MVA. The motor is drawing 40 MW at 0.8 p.f leading with a terminal voltage of 10.95 KV when a 3-phase fault occurs at the generator terminals. Calculate the total current in generator and motor under fault condition.

14. (a) What are the assumptions to be made in short circuit studies? Deduces and thaw the sequence network for a line fault at the terminal of an unloaded generator.
(OR)
(b) Two 11 KV, 20 MVA, three phase, star connected generator operate in parallel as shown in given figure the positive, negative and zero sequence reactances of each being, respectively, j0.18, j0.15, j0.10 p.u. The star point of one of the generators is isolated and that of the other is earthed through a 2.0 O resistor. A single line to ground fault occurs at the terminals of one of the generators.
Estimate (i) The fault current
(ii) Current in grounding resistor, and
(iii) The voltage across grounding resistor.

15. (a) Describe the Runge-Kutta method of solution of swing equation for multi-machine systems.
(OR)
(b) Derive an expression for the critical clearing angle and clearing time.

Power System Analysis 6th AM11 EE2351



Power System Analysis 6th AM11 EE2351

B.E. / B.Tech. Degree Examination, April / May 2011
Sixth Semester
Electrical and Electronics Engineering
EE 2351 – Power System Analysis
(Regulation 2008)

Other Departments Papers: Click Here

Download PDF File - Click Here

Part A – (10 × 2 = 20 marks)

1. Draw a simple per-phase model for a cylindrical rotor synchronous machine?
2. What are the advantages of per unit system?
3. What is Jacobian matrix?
4. What is a slack bus?
5. Mention the objectives of short circuit analysis.
6. Write down the balanced and unbalanced faults occurring in a power system.
7. What is sequence network?
8. Write the symmetrical components of a three phase system?
9. Define critical clearing angle.
10. Write swing equation.

Part B – (5 × 16 = 80 marks)

11. (a) (i) With the help of single line diagram, explain the basic components of a power system. (8)
(ii) Write detailed notes about the per-phase model of a three phase transformer. (8)
(OR)
(b) Draw the impedance diagram for the electric power system shown in given figure showing all impedance in per unit on a 100 MVA base.
Choose 20 KV as the voltage base for generator. The tree-phase power and line-lie ratings are given below. (16)
Generator G1: 90 MVA 20 KV X = 9 %
Transformer T1: 80 MVA 20 / 200 KV X = 16 %
Transformer T2: 80 MVA 200 / 20 KV X = 20 %
Generator G2: 90 MVA 18 KV X = 9 %
Line: 200 KV X = 120
Load: 200 KV, S = 48 MW + j64 MVAr

12 (a) With neat flow chart explain the computational procedure for load flow solution using fast decoupled method when the system contains all types of buses.
(OR)
(b) Explain the step by step computational procedure for Gauss-Seidel method of load flow studies.

13 (a) Explain symmetrical fault analysis using Zbus matrix with eat flow chart.
(OR)
(b) A 11 KV, 100 MVA alternator having a sub-transient reactance of 0.25 p.u is supplying a 50 MVA motor having a sub-transient reactance of 0.2 p.u through a transmission line. The line reactance is 0.05 p.u on a base of 100 MVA. The motor is drawing 40 MW at 0.8 p.f leading with a terminal voltage of 10.95 KV when a 3-phase fault occurs at the generator terminals. Calculate the total current in generator and motor under fault condition.

14. (a) What are the assumptions to be made in short circuit studies? Deduces and thaw the sequence network for a line fault at the terminal of an unloaded generator.
(OR)
(b) Two 11 KV, 20 MVA, three phase, star connected generator operate in parallel as shown in given figure the positive, negative and zero sequence reactances of each being, respectively, j0.18, j0.15, j0.10 p.u. The star point of one of the generators is isolated and that of the other is earthed through a 2.0 O resistor. A single line to ground fault occurs at the terminals of one of the generators.
Estimate (i) The fault current
(ii) Current in grounding resistor, and
(iii) The voltage across grounding resistor.

15. (a) Describe the Runge-Kutta method of solution of swing equation for multi-machine systems.
(OR)
(b) Derive an expression for the critical clearing angle and clearing time.

Anna University Practical, Theory Exam Schedules for 3rd, 5th, 7th Semester Nov/Dec 2013



Anna University Practical,Theory Exam Schedules for 3rd, 5th, 7th Semester Nov/Dec 2013

Anna University Exam Dates 2013 Anna university official notification for the nov/dec 2013 exams ( 3rd, 5th, 7th sem ) , Jan 2014 ( 1st semester ) examinations . Read on to know the Practical exam dates , theory exam dates for b.e / b.tech, m.e , m.tech, B.arch, mca, mba . Anna university ug […]

The post Anna University Practical,Theory Exam Schedules for 3rd, 5th, 7th Semester Nov/Dec 2013 appeared first on Anna University Updates 2013.

Anna University Exams Schedule 2014 BE ME Anna University Timetable Nov Dec 2013



Anna University Exams Schedule 2014 BE ME Anna University Timetable Nov Dec 2013

Anna University Time Table 2013 Nov Dec Exam 2013 Jan 2014 Time Table 2013 Chennai Tirunelveli Coimbatore Madurai Trichy Timetable 2013 2014 - UG Nov Dec Exam 2013 2014 Time Table - www.annauniv.edu

Anna University Exams Schedule 2014
Anna University Exams Schedule 2014 
Anna University Today Announced November December 2013 Examination Notification .anna university time table for 1st 2nd 3rd 4th 5th 6th 7th 8th semester Nov/Dec 2013 Session

As Per Anna University Plan Theory Exams For Nov Dec 2013 Starts 13.11.2013 
-----------------------------------------------------------

It is informed that the Oct./Nov./Dec. 2013 (Higher Semester) and Dec. 2013/ January 2014 (I Semester) Theory, Practical & Project viva voce examinations
are scheduled to be held as detailed below:‐ 



Higher Semesters (II to X) of UG and PG Programmes

Last working day : 08.11.2013
Practical Examinations SlotI: 24.10.2013 to 31.10.2013
                                         Slot II: 05.11.2013 to 11.11.2013

Commencement of UG/PG Theory Examinations : 13.11.2013
-----------------------------------------------------------
I Semester of UG and PG Programmes

Last working day : 20.12.2013 for UG
                                 26.12.2013 for PG
Practical Examinations SlotI: 09.12.2013 to 14.12.2013
                                        SlotII: 16.12.2013 to 20.12.2013

Commencement of Theory Examinations : 02.01.2014
-----------------------------------------------------------
III Semester ofM.E./M.Tech. Project Viva voce (Phase – I) Examinations

Last date for submission of ProjectReport 
to the college by the students
: 08.12.2013

M.E./M.Tech. Project Viva‐Voce (Phase – I) : 27.12.2013 to 31.12.2013
-----------------------------------------------------------

Searches related to anna university time table 2013 :

anna university time table for 1st 2nd 3rd 4th 5th 6th 7th 8th semester
anna university time table 2013 2014 
for 1st 3rd 5th 7th semester nov dec 2013 timetable
anna university time table for 1st semester 2013 2014
anna university time table for 3rd semester 2013 2014
anna university time table for 5th semester 2013 2014
anna university time table
anna university time table for 1st 2nd 3rd 4th 5th 6th 7th 8th semester
anna university time table 2013 2014 for 1st 3rd 5th 7th semester nov dec 2013 timetable
anna university time table for 1st semester 2013 2014 all departments
anna university time table for 3rd semester 2013 2014 all departments 
anna university time table for 5th semester 2013 2014 all departments 
anna university time table for 7th semester 2013 2014 all departments
anna university time table for all semester 2013 2014 all departments 
anna university time table 2013 for regulation 2008 2009 2010 2011 2012 2013anna university time table for 4th semester 2013
anna university time table for 6th sem 2013
anna University nov dec exam 2013 time table for ece eee cse it civil mech auto aero and all departmetns
anna university UG nov dec exam timetable 2013 anna university nov dec 2013 time table for 1st 3rd 5th 7th semester 2013
anna university time table 2013
anna university 1st 3rd 5th 7th semester time table 2013
anna university time table nov dec 2013anna university time table for regulation 2008 2010 2012 time tableanna university regulation 2013 timetable
anna university UG regulation 2010 timetable
anna university UG regulation 2008 timetable
rejinpaul anna university timetable for 7th semester 2013 2014
anna university time table for all semester 2013 2014anna university time table for regulation 2008
anna University nov dec 2013 timetable for ece eee cse it civil mech auto aero and all departmentsanna university UG timetable 2013
anna university nov dec 2013 time table for 1st 3rd 5th 7th semester 2013 anna university time table 2013anna university 1st 3rd 5th 7th semester time table 2013
anna university time table nov dec 2013anna university time table for regulation 2008 2010 2012 time tableanna university regulation 2013 timetable
anna university UG regulation 2010 timetable
anna university UG regulation 2008 timetable
rejinpaul anna university timetable

Anna university Chennai Practical Exam Time table Oct/Nov/Dec 2013



Anna university Chennai Practical Exam Time table Oct/Nov/Dec 2013

Anna university Chennai Practical Exam Time table Oct/Nov/Dec 2013 – 1st, 3rd, 5th, 7th semester Practicals Date Anna university which is conducting the examination for the affilited engineering colleges in tamil nadu has published the Anna university practical exam time table 2013 for the upcoming odd semester examinations which is to be conducted in the Continue Reading »

The post Anna university Chennai Practical Exam Time table Oct/Nov/Dec 2013 appeared first on University.

Computer Networks 6th MJ13



Computer Networks 6th MJ13

B.E/B.Tech. DEGREE EXAMINATION, MAY/JUNE 2013
Sixth Semester
Electrical and Electronics Engineering
CS 2363/CS 65/10144 CS 503- COMPUTER NETWORKS
(Regulation 2008/2010)

Other Departments Papers: Click Here

Download PDF File - Click Here

PART A (10*2=20Marks)

1.Show with an examples how encoding can be done using NRZI technique.
2.What is meant by 1 –persistent CSMA?
3.What are the uses of internetwork routing?
4.What is the purpose of subnetting?
5.List any four QoS parameters.
6.Differentiate flow control from congestion control.
7.Define cryptography.
8.What is meant by PGP?
9.State the advantages of DNS.
10.What are overlay networks?

PART B—(5*16=80MARKS)

11.(a) Discuss in detail on cyclic redundancy check with suitable examples. (16)
Or
(b) Explain in detail the following:
(i) Transparent bridging. (8)
(ii) Source routing bridges. (8)

12. (a) Compare Address Resolution Protocol and RARP. (16)
Or
(b) Write short notes on the following routing:
(i) Shortest path routine. (4)
(ii) Flooding. (4)
(iii) Distance vector routing. (4)
(iv) Flow based routing. (4)

13. (a) Discuss in detail the TCP segment header. Discuss about connection management in TCP. (16)
Or
(b) Explain in detail about various congestion control techniques. (16)

14.(a) Discuss RSA algorithm in detail. (16)
Or
(b) Explain the following :
(i) Authentication based on shared secret key. (8)
(ii) Authentication using a key distribution center. (8)

15. (a) Explain in detail the SNMP model with relevant diagrams. (16)
Or
(b) Discuss the applications of multimedia in audio and video (16)

Computer Networks 6th MJ13



Computer Networks 6th MJ13

B.E/B.Tech. DEGREE EXAMINATION, MAY/JUNE 2013
Sixth Semester
Electrical and Electronics Engineering
CS 2363/CS 65/10144 CS 503- COMPUTER NETWORKS
(Regulation 2008/2010)

Other Departments Papers: Click Here

Download PDF File - Click Here

PART A (10*2=20Marks)

1.Show with an examples how encoding can be done using NRZI technique.
2.What is meant by 1 –persistent CSMA?
3.What are the uses of internetwork routing?
4.What is the purpose of subnetting?
5.List any four QoS parameters.
6.Differentiate flow control from congestion control.
7.Define cryptography.
8.What is meant by PGP?
9.State the advantages of DNS.
10.What are overlay networks?

PART B—(5*16=80MARKS)

11.(a) Discuss in detail on cyclic redundancy check with suitable examples. (16)
Or
(b) Explain in detail the following:
(i) Transparent bridging. (8)
(ii) Source routing bridges. (8)

12. (a) Compare Address Resolution Protocol and RARP. (16)
Or
(b) Write short notes on the following routing:
(i) Shortest path routine. (4)
(ii) Flooding. (4)
(iii) Distance vector routing. (4)
(iv) Flow based routing. (4)

13. (a) Discuss in detail the TCP segment header. Discuss about connection management in TCP. (16)
Or
(b) Explain in detail about various congestion control techniques. (16)

14.(a) Discuss RSA algorithm in detail. (16)
Or
(b) Explain the following :
(i) Authentication based on shared secret key. (8)
(ii) Authentication using a key distribution center. (8)

15. (a) Explain in detail the SNMP model with relevant diagrams. (16)
Or
(b) Discuss the applications of multimedia in audio and video (16)

Advanced IC Engines 8th MJ2013 ME2041



Advanced IC Engines 8th MJ2013 ME2041

Question Paper Code : 21555
B.E./B.Tech. DEGREE EXAMINATION , MAY/JUNE 2013
Eighth Semester
Mechanical Engineering
ME 2041/ME 807 – ADVANCED I.C. ENGINES
(Regulation 2008)


Other Departments Papers: Click Here

Download PDF File - Click Here

PART A – (10 X 2 = 20 marks)

1. What is a heterogeneous air-fuel mixture? In which engine is it used?
2. Sketch T-Head type combustion chamber used in S.I engines.
3. Mention any two advantages of induction swirl.
4. What is an indirect-injection type combustion chamber.
5. Why smoke is formed in a CI engine?
6. State the significance of stoichiometric air-fuel mixture.
7. State the methods by which ethanol is produced.
8. Comment on the water tolerance of alcohol blends.
9. What is the working principle of prechamber stratified charge engine?
10. Mention the advantages of plasma ignition system.

PART B – (5 X 16 = 80 marks)

11. (a) (i) Explain the stages of combustion in SI engines elaborating the flame front propagation. (10)
(ii) Explain briefly the various factors that influence the flame speed in S.I. engines. (6)
Or
(b) Describe the requirements of an S.I engine combustion chamber and explain the various types of combustion chamber.

12. (a) With the aid of a schematic diagram , explain the combustion process in a C.I engine.
Or
(b) Explain the factors affecting the delay period in C.I engines and summarize them.

13. (a) (i) Specify the main emissions from a multi-cylinder passenger car C.I engine. How is the air-fuel ratio controlled so as to reduce emissions? (10)
(ii) What is a driving cycle? Discuss its significance with regard to emissions. (6)
Or
(b) (i) Explain the functioning of three way catalytic converter , with a sketch. Mention the limitations of a catalytic converter. (12)
(ii) What are the methods to reduce particulate matter emissions?

14. (a) Compare the properties of gasoline , methanol and ethanol as engine fuels and explain how they influence combustion and emissions?
Or
(b) Discuss the change in properties of alcohol-petrol blends and their effect on the performance of the engine.

15. (a) (i) Describe with a sketches how a CI engine can be controlled electronically. (12)
(ii) What is stratified charge? Give its significance. (4)
Or
(b) (i) Describe the features of homogenous charge compression ignition engine and common rail direct injection engine with neat sketches. (6 + 6)
(ii) Briefly discuss about the necessity of pressure pick , charge amplifier in an IC engine. (4)

Advanced IC Engines 8th MJ2013 ME2041



Advanced IC Engines 8th MJ2013 ME2041

Question Paper Code : 21555
B.E./B.Tech. DEGREE EXAMINATION , MAY/JUNE 2013
Eighth Semester
Mechanical Engineering
ME 2041/ME 807 – ADVANCED I.C. ENGINES
(Regulation 2008)


Other Departments Papers: Click Here

Download PDF File - Click Here

PART A – (10 X 2 = 20 marks)

1. What is a heterogeneous air-fuel mixture? In which engine is it used?
2. Sketch T-Head type combustion chamber used in S.I engines.
3. Mention any two advantages of induction swirl.
4. What is an indirect-injection type combustion chamber.
5. Why smoke is formed in a CI engine?
6. State the significance of stoichiometric air-fuel mixture.
7. State the methods by which ethanol is produced.
8. Comment on the water tolerance of alcohol blends.
9. What is the working principle of prechamber stratified charge engine?
10. Mention the advantages of plasma ignition system.

PART B – (5 X 16 = 80 marks)

11. (a) (i) Explain the stages of combustion in SI engines elaborating the flame front propagation. (10)
(ii) Explain briefly the various factors that influence the flame speed in S.I. engines. (6)
Or
(b) Describe the requirements of an S.I engine combustion chamber and explain the various types of combustion chamber.

12. (a) With the aid of a schematic diagram , explain the combustion process in a C.I engine.
Or
(b) Explain the factors affecting the delay period in C.I engines and summarize them.

13. (a) (i) Specify the main emissions from a multi-cylinder passenger car C.I engine. How is the air-fuel ratio controlled so as to reduce emissions? (10)
(ii) What is a driving cycle? Discuss its significance with regard to emissions. (6)
Or
(b) (i) Explain the functioning of three way catalytic converter , with a sketch. Mention the limitations of a catalytic converter. (12)
(ii) What are the methods to reduce particulate matter emissions?

14. (a) Compare the properties of gasoline , methanol and ethanol as engine fuels and explain how they influence combustion and emissions?
Or
(b) Discuss the change in properties of alcohol-petrol blends and their effect on the performance of the engine.

15. (a) (i) Describe with a sketches how a CI engine can be controlled electronically. (12)
(ii) What is stratified charge? Give its significance. (4)
Or
(b) (i) Describe the features of homogenous charge compression ignition engine and common rail direct injection engine with neat sketches. (6 + 6)
(ii) Briefly discuss about the necessity of pressure pick , charge amplifier in an IC engine. (4)

Principle Of Communication 3rd AM11 IT2202



Principle Of Communication 3rd AM11 IT2202

B.E./B.Tech. DEGREE EXAMINATION, APRIL/MAY 2011
Third Semester
Information Technology
IT 2202 - PRINCIPLES OF COMMUNICATION
(Regulation 2008)

Other Departments Papers: Click Here

Download PDF File - Click Here

PART A — (10 × 2 = 20 marks)

1. Define angle modulation.
2. What is percent modulation?
3. Define Quadrature amplitude modulation.
4. State sampling theorem.
5. Compare PCM and DM.
6. Mention two applications of FSK.
7. Define processing gain.
8. What is the difference of multiplexing and multiple accessing?
9. State Keplers law.
10. What are the different types of losses in optical fiber?

PART B — (5 × 16 = 80 marks)

11. (a) (i) Compare AM, FM and PM. (12)
(ii) Write short notes on AM power distribution. (4)
Or
(b) (i) When the modulating frequency in a FM system is 400 Hz and the modulating voltage is 2.4 V. The modulating index is 60. Calculate the maximum frequency deviation. What is the modulation index when modulation frequency is reduced to 250 Hz and modulating voltage is raised to 3.2 V (6)
(ii) (1) Define modulation index of AM, FM and PM. (6)
(2) Define frequency deviation and phase deviation. (4)

12. (a) (i) Explain about the Shannon limit for information capacity. (8)
(ii) Define bit rate, baud rate and bandwidth consideration of FSK. (6)
(iii) Define digital amplitude modulation. (2)
Or
(b) (i) Explain ASK system and discuss its advantages. (8)
(ii) Describe FSK modulator with a neat diagram. (8)

13. (a) Write short notes on :
(i) Adaptive delta modulation. (6)
(ii) Differential pulse code modulation. (6)
(iii) Inter-symbol interference. (4)
Or
(b) (i) Explain the quantization process in PCM. (6)
(ii) Describe the delta modulation system with necessary diagram. (10)

14. (a) (i) Write short notes on direct sequence spread spectrum with coherent BPSK (10)
(ii) Explain about the Pseudorandom sequence. (6)
(b) Explain in detail about the source coding of speech for wireless communications. (16)

15. (a) With a neat diagram, explain briefly about the basic satellite communication systems. Also discuss its applications. (16)
Or
(b) (i) What are the types of optical fiber? Explain. (8)
(ii) Explain briefly about the sources of optical fiber. (8)

Principle Of Communication 3rd AM11 IT2202



Principle Of Communication 3rd AM11 IT2202

B.E./B.Tech. DEGREE EXAMINATION, APRIL/MAY 2011
Third Semester
Information Technology
IT 2202 - PRINCIPLES OF COMMUNICATION
(Regulation 2008)

Other Departments Papers: Click Here

Download PDF File - Click Here

PART A — (10 × 2 = 20 marks)

1. Define angle modulation.
2. What is percent modulation?
3. Define Quadrature amplitude modulation.
4. State sampling theorem.
5. Compare PCM and DM.
6. Mention two applications of FSK.
7. Define processing gain.
8. What is the difference of multiplexing and multiple accessing?
9. State Keplers law.
10. What are the different types of losses in optical fiber?

PART B — (5 × 16 = 80 marks)

11. (a) (i) Compare AM, FM and PM. (12)
(ii) Write short notes on AM power distribution. (4)
Or
(b) (i) When the modulating frequency in a FM system is 400 Hz and the modulating voltage is 2.4 V. The modulating index is 60. Calculate the maximum frequency deviation. What is the modulation index when modulation frequency is reduced to 250 Hz and modulating voltage is raised to 3.2 V (6)
(ii) (1) Define modulation index of AM, FM and PM. (6)
(2) Define frequency deviation and phase deviation. (4)

12. (a) (i) Explain about the Shannon limit for information capacity. (8)
(ii) Define bit rate, baud rate and bandwidth consideration of FSK. (6)
(iii) Define digital amplitude modulation. (2)
Or
(b) (i) Explain ASK system and discuss its advantages. (8)
(ii) Describe FSK modulator with a neat diagram. (8)

13. (a) Write short notes on :
(i) Adaptive delta modulation. (6)
(ii) Differential pulse code modulation. (6)
(iii) Inter-symbol interference. (4)
Or
(b) (i) Explain the quantization process in PCM. (6)
(ii) Describe the delta modulation system with necessary diagram. (10)

14. (a) (i) Write short notes on direct sequence spread spectrum with coherent BPSK (10)
(ii) Explain about the Pseudorandom sequence. (6)
(b) Explain in detail about the source coding of speech for wireless communications. (16)

15. (a) With a neat diagram, explain briefly about the basic satellite communication systems. Also discuss its applications. (16)
Or
(b) (i) What are the types of optical fiber? Explain. (8)
(ii) Explain briefly about the sources of optical fiber. (8)

Anna university Odd Semester December 2013 / January 2014 Exam Notification



Anna university Odd Semester December 2013 / January 2014 Exam Notification

Anna university has issued notification for October /November / December 2013 & January 2014 Examinations

It is informed that the Oct./Nov./Dec. 2013 (Higher Semester) and Dec. 2013/ January 2014 (I Semester) Theory, Practical & Project viva voce examinations are scheduled to be held as detailed below:

Higher Semesters (II to X) of UG and PG Programmes

  • Last working day : 08.11.2013

Practical Examinations
  • Slot I : 24.10.2013 to 31.10.2013
  • Slot II : 05.11.2013 to 11.11.2013

Commencement of UG/PG Theory Examinations : 13.11.2013

 

I Semester of UG and PG Programmes

Last working day :
  • 20.12.2013 for UG
  • 26.12.2013 for PG
Practical Examinations Slot I : 09.12.2013 to 14.12.2013

Slot II : 16.12.2013 to 20.12.2013
Commencement of Theory Examinations : 02.01.2014

III Semester of M.E./M.Tech. Project Viva voce (Phase . I) Examinations

Last date for submission of Project Report to the college by the students : 08.12.2013
M.E./M.Tech. Project Viva Voce (Phase . I) : 27.12.2013 to 31.12.2013

HYDROLOGY 6th AM11 CE2021



HYDROLOGY 6th AM11 CE2021

Question Paper Code : 11197 421
B.E./B.Tech. DEGREE EXAMINATION, APRIL/MAY 2011
Sixth Semester
Civil Engineering
CE 2021 - HYDROLOGY
(Regulation 2008)

Other Departments Papers: Click Here

Download PDF File - Click Here

PART A — (10 × 2 = 20 marks)

1. What are the various forms of precipitation?
2. Define Probable Maximum Precipitation.
3. How do you control reservoir evaporation?
4. How do you measure infiltration?
6. What are the limitations of unit hydrograph theory?
5. Define time of concentration.
7. Define Recurrence interval of flood.
8. A flood has a return period of 23 years. What is the Probability exceedance of the flood?
9. Define aquifer.
10. State the limitations of Darcys law.

PART B — (5 × 16 = 80 marks)

11. (a) (i) Explain Hydrologic Cycle with neat sketch. (10)
(ii) What are the various types of precipitation? (6)
Or
(b) (i) How do you measure rainfall? (10)
(ii) Analysis of data on maximum one-day rainfall depth at Chennai indicated that a depth of 280 mm had a return period of 50 years Determine the probability of a one-day rainfall depth equal to or greater than 280 mm at Chennai occurring (1) once in 20 successive years (2) twice in 15 successive Years (6)

12. (a) (i) What are the factors affecting evaporation losses? (6)
(ii) A 6 hr storm produced rainfall intensities of 7, 18, 25, 12, 10 and 3 mm/hr in successive one hour intervals a basin of 800 sq.km. The resulting runoff is observed to be 2640 ha.m. Determine Ø - index for the basin. (10)
Or
(b) How do you measure evaporation Using Pan and Water Budget (16)

13. (a) (i) What are the factors affecting flood hydrograph? Explain. (8)
(ii) In a 4 hr. storm with 50 mm of excess rainfall from a basin, the flows in the stream were as follows :
Time (hrs) : 0 2 4 6 8 12 16 20 Flow (m^3/s) : 0 1.22 4.05 6.75 5.67 3.375 1.35 0
(1) Determine the ordinates of unit hydrograph least once in 20 successive years. (6)
(2) Estimate the peak flow and the time of its occurrence in a flood created by a 8 hr storm, which results in 2.5 cm of effective rainfall during the first 4 hours and 3.75 cm of effective rainfall during the second 4 hours. Assume the base flow as negligible. (2)
Or
(b) (i) State the assumptions in unit hydrograph theory. (6)
(ii) The ordinates of a 4 hr unit hydrograph of a basin of area 300 sq.km. measured at 1 hr intervals are 6, 36. 66.91, 106, 93.79, 68, 58.49, 41, 34, 27, 23, 17, 13, 9,6,3 and 1.5 m^3/s respectively. Determine the ordinates of a 3 hr Unit hydrograph for the basin. (10)

14. (a) (i) How do you determine the magnitude of flood of specific return period using Gumbels method? (6)
(ii) The 50 year and 100 year flood have been estimated to be 660 m^3/s and 740 m^3/s from the available data of annual flood peaks of a small stream for a period of 35 years using Gumbels method. Estimate the 200 year flood in the stream. (10)
Or
(b) (i) Explain briefly about various Flood control measures. (6)
(ii)Reach and derive the outflow hydrographic. The values of K and X for the reach may be taken as 12 hr and 0.278 respectively, time is in hours and flow is in cumecs. (10)
Time 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56
Flow 42 68 116 164 194 200 192 170 150 128 106 88 74 62 54

15. (a) (i) What are the various types of aquifers? Explain. (8)
(ii) How do you determine the Specific Yield using Recuperation Test? (8)
Or
(b) (i) State the assumptions and limitations of Dupuits Theory. (6)
(ii) Route the flood hydrograph given below through a channel well is 40 m before the pumping is started. When pumping is being done at the rate of 3.33 × 10^–2 cumecs, the drawdown in a well 10 m away is 4 m and in another well 20 m away is 2 m. Determine :
(1) Drawdown in the well
(2) Co-efficient of permeability
(3) Drawdown in the well
(4) The maximum rate at which water can be pumped from the well. (10)

HYDROLOGY 6th AM11 CE2021



HYDROLOGY 6th AM11 CE2021

Question Paper Code : 11197 421
B.E./B.Tech. DEGREE EXAMINATION, APRIL/MAY 2011
Sixth Semester
Civil Engineering
CE 2021 - HYDROLOGY
(Regulation 2008)

Other Departments Papers: Click Here

Download PDF File - Click Here

PART A — (10 × 2 = 20 marks)

1. What are the various forms of precipitation?
2. Define Probable Maximum Precipitation.
3. How do you control reservoir evaporation?
4. How do you measure infiltration?
6. What are the limitations of unit hydrograph theory?
5. Define time of concentration.
7. Define Recurrence interval of flood.
8. A flood has a return period of 23 years. What is the Probability exceedance of the flood?
9. Define aquifer.
10. State the limitations of Darcys law.

PART B — (5 × 16 = 80 marks)

11. (a) (i) Explain Hydrologic Cycle with neat sketch. (10)
(ii) What are the various types of precipitation? (6)
Or
(b) (i) How do you measure rainfall? (10)
(ii) Analysis of data on maximum one-day rainfall depth at Chennai indicated that a depth of 280 mm had a return period of 50 years Determine the probability of a one-day rainfall depth equal to or greater than 280 mm at Chennai occurring (1) once in 20 successive years (2) twice in 15 successive Years (6)

12. (a) (i) What are the factors affecting evaporation losses? (6)
(ii) A 6 hr storm produced rainfall intensities of 7, 18, 25, 12, 10 and 3 mm/hr in successive one hour intervals a basin of 800 sq.km. The resulting runoff is observed to be 2640 ha.m. Determine Ø - index for the basin. (10)
Or
(b) How do you measure evaporation Using Pan and Water Budget (16)

13. (a) (i) What are the factors affecting flood hydrograph? Explain. (8)
(ii) In a 4 hr. storm with 50 mm of excess rainfall from a basin, the flows in the stream were as follows :
Time (hrs) : 0 2 4 6 8 12 16 20 Flow (m^3/s) : 0 1.22 4.05 6.75 5.67 3.375 1.35 0
(1) Determine the ordinates of unit hydrograph least once in 20 successive years. (6)
(2) Estimate the peak flow and the time of its occurrence in a flood created by a 8 hr storm, which results in 2.5 cm of effective rainfall during the first 4 hours and 3.75 cm of effective rainfall during the second 4 hours. Assume the base flow as negligible. (2)
Or
(b) (i) State the assumptions in unit hydrograph theory. (6)
(ii) The ordinates of a 4 hr unit hydrograph of a basin of area 300 sq.km. measured at 1 hr intervals are 6, 36. 66.91, 106, 93.79, 68, 58.49, 41, 34, 27, 23, 17, 13, 9,6,3 and 1.5 m^3/s respectively. Determine the ordinates of a 3 hr Unit hydrograph for the basin. (10)

14. (a) (i) How do you determine the magnitude of flood of specific return period using Gumbels method? (6)
(ii) The 50 year and 100 year flood have been estimated to be 660 m^3/s and 740 m^3/s from the available data of annual flood peaks of a small stream for a period of 35 years using Gumbels method. Estimate the 200 year flood in the stream. (10)
Or
(b) (i) Explain briefly about various Flood control measures. (6)
(ii)Reach and derive the outflow hydrographic. The values of K and X for the reach may be taken as 12 hr and 0.278 respectively, time is in hours and flow is in cumecs. (10)
Time 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56
Flow 42 68 116 164 194 200 192 170 150 128 106 88 74 62 54

15. (a) (i) What are the various types of aquifers? Explain. (8)
(ii) How do you determine the Specific Yield using Recuperation Test? (8)
Or
(b) (i) State the assumptions and limitations of Dupuits Theory. (6)
(ii) Route the flood hydrograph given below through a channel well is 40 m before the pumping is started. When pumping is being done at the rate of 3.33 × 10^–2 cumecs, the drawdown in a well 10 m away is 4 m and in another well 20 m away is 2 m. Determine :
(1) Drawdown in the well
(2) Co-efficient of permeability
(3) Drawdown in the well
(4) The maximum rate at which water can be pumped from the well. (10)